PRODUCTS

Blog Single
GENERAL FEATURES
 
Dizayn Oksi Plus combi pipes is a 3 patented system whose technology is completely realized by Dizayn Group. These pipes are composite structures of PPR pipes. The pipe consists of two PPR layers with equal wall thickness and aluminum foil between these layers. The adhesion of the foil and the PPR layer has been achieved with the adhesive on the top and bottom of the aluminum foil in the middle of the wall thickness. The reasons why aluminum foil pipes are preferred in the installation are as follows;
 
1. Compressive strength at high temperatures 
 
2. Less thermal expansion
 
3.Oxygen Insulation 
 
The above features are at the highest level in the oksi plus combi pipe compared to other stable pipes.
 
ADVANTAGES
 
DİZAYN OKSI PLUS COMBI PIPE DOES NOT NEED SHARPING.
 
Dizayn Oksi  Plus Combi Pipe, in which the aluminum foil is placed right in the middle of the wall thickness with its unique technology, has eliminated the foil peeling process called shaving. With this technology, Dizayn has eliminated the time loss of the plumber, muscle fatigue and nervousness in removing the foil remaining on the pipe surface, which cannot be removed by shaving, with a second process.
 
DİZAYN OKSI PLUS COMBI PIPE EXTENSES THE LIFE OF THE INSTALLATION.
 
In an installation to be made using Foiled Pipe, the oxygen permeability value required by DIN 4726 Standard can only be achieved with the oxy plus boiler pipe.
 
With the Dizayn Oxy Plus Combi Pipe, the oxygen permeability is below the level of 0.1 g / m3xday stipulated by the DIN 4726 Standard, as the parts inside the fitting are foiled. In other foiled pipes, the oxygen entering the system through the polypropylene polymer chains in the non-foiled areas reaches the water. Dissolved oxygen carried in water comes into contact with metal parts. As a result of the chemical reaction, iron oxide, in other words rust, is formed. With continuous oxygen input, corrosion continues and causes radiators and boilers to rupture, pumps malfunction and energy consumption.
 
Dizayn Oksi Plus Combi Pipe does not pass oxygen molecules and there is no corrosion in the system. The heating system works with the efficiency of the first day.
 
DİZAYN OKSI STABLE PIPE MAKES MINIMUM EXPANSION.
 
While the fluid at a temperature of 80 ° C in the pipe without foil elongates 10.8 mm at 1000 mm, the Dizayn Oksi Plus Combi Pipe elongates by 1 mm at 1000 mm under the same conditions.
 
The clamps pipes used during the lesson intervals stopped. Unable to find enough space to elongate when hot water passes, the pipe without foil creates deflection between the clamps and creates visual pollution. The 10 mm non-extensible pipe deflects 40 mm. Dizayn Oxy Plus Combi pipe does not make the pipe.
 
 
DİZAYN OKSI PLUS COMBI PIPE IS THE PIPE WITH THE BEST ADHESIVE LAYER.
 
Thanks to Dizayn's patented manufacturing process, the adhesive layer establishes a chemical and physical bond with both the layer made of PP-R 80 and aluminum foil. It achieves the tear strength value of 15 N required by the German DVGW W534 standard with 400% more.
 
DİZAYN OXY PLUS COMBI PIPE DOES NOT LOSS.
 
Since the short parts of Oxy Plus Combi Pipes can be used easily, the amount of fire is minimized. Pipe waste is prevented.
 
 
DİZAYN OXY PLUS COMBI PIPE IS AESTHETIC.
 
The color seen in the middle of the foil in Dizayn Oxy Plus Combi pipes is not gray but full white. However, the gray color of aluminum causes the outer layer to appear gray due to the large amount of top layer in existing fixed pipes. Dizayn Oxy Plus Combi pipes bring this feature to the same color harmony with fittings and do not create an aesthetic appearance.
 
 
DIAMETER DIMENSIONS OF DİZAYN OKSİ PLUS COMBI PIPE ARE SUITABLE TO STANDARD.
 
The production of foil and pprc layer thickness above the standard diameter in known foiled hoses causes the pipe outer diameter to have a non-standard value. Dizayn oxy plus boiler pipe is the only foiled pipe that does not have non-standard diameter dimensions thanks to the foil in the middle. The oxi plus boiler pipe, which has standard diameter dimensions, takes up less tank volume and its installation does not require special clamps.
 
 
DİZAYN OXY PLUS COMBI PIPE PREVENTS ERRORS IN WELDING.
 
The foil remaining on the outer surface, which is a disadvantage of shaving in other oxy-stable programs, can prevent welding problems caused by the list of standard values ​​of the pipe outer diameter. The Oxy Plus boiler tube always provides the right source.
 
 
IT IS A 3 PATENTED SYSTEM.
 
It is a 3 patented system with Oxy plus boiler pipe, Surface Leveling Apparatus and Dizayn Special Welding Threader.
 
 
Other products
 
Dizayn PPR Clean Water Pipe and Its Additional Parts
Dizayn PEX-B Plus Pipe and Its Additional Parts
Dizayn Oxy Plus Combi Pipe and Its Additional Parts
Dizayn Elit Pipe
Dizayn Wastewater Silent-Nanotechnology 2 Pipes and Fittings
Dizayn Wastewater Extra Pipe and Its Additional Parts
Design Cornered Rain